10.4" display with Encoder and Touch

[Pragathes]

Project Name: patient Monitor
Controller of the board: STM32H743II
Software Tool : STM32 CUBE IDE 1.5.0
LVGL VER: 7.6.1
DISPLAY: 10.4" TFT display from Waveshare resolution 1024 x 600

Display waveform update without Touch and Encoder operation in parallel

Only value update encoder and Touch not used during operation

Display waveform update while you operate the Encoder

Waveform update during Encoder in operation

Display Waveform update while Touch button getting enabled

Waveform update with Tocuh operation on a Switch

the chart is fine when no inputs are used (touch or encoder) but there is a short “freeze” when the inputs are used.

The code file is attached.

LVGL_ARIES_STM.zip (13.4 KB)

[Paulo-Pecegueiro]

Hello, thanks for sharing, your project is very interesting!